Description

The F-A85/8 is a torx-head self-tapping screw with the added feature of a drill point. No need to pre-pierce with a drill bit.

Use it to attach practically every accessory that is installed on a pipe or a joint set, often used to reinforce joint sets when necessary.

We recommend keeping these in stock at all times, this product comes in a box of 100 units.

Installation Steps:
See the installation steps tab to view how to assemble this screw.

Technical Information:
This screw is fixed using a #2 square head bit.

Sold per box of 100 units.

Reviews

There are no reviews yet.

Be the first to review “Joints screws”

You must be logged in to post a review.

Ensure you have the following parts:
- 1x Joint set of your choice
- 1x F-A85/8
- 2x 28mm pipes of your choice
- 1x Drill with #2 square head
Align screw with corresponding hole
Use drill to drive screw through, DO NOT overtighten to avoid snapping head off.

Box Quantity	100
Weight (kg/lbs)	1.870 lb (0.850 kg)
Box Dimensions	Cardboard box of 2 1/2 X 2 3/4 X 1 3/4 in (64 mm X 70 mm X 45 mm)
Common Usage	Reinforce joint sets
Compatible brand	Flexpipe, Creform, Fastube
Non Compatible Brand	Trilogiq
Primary Material	Galvanized steel
Temperature Resistance	40°F to 572°F (-40°C to 300°C)
Frequency of Use	High
Electric Conductivity (ESD)	Yes