Out Of STOCK
EW-4ESB

4" anti-static swivel stem-mount caster with brake

$53.89

  • Electric conductivity (ESD) caster
  • 4 inches (100 mm) diameter wheel
  • 250 pounds (113 kg) loading capacity
  • 2.5Mph maximum speed

Out of stock

SKU: EW-4ESB Category:

Description

Electric conductivity (ESD) 4 inches swivel stem caster with brake and a loading capacity of 250 pounds (113 kg) and a maximum speed of 2.5Mph. The stem-mount is made with a rubber bushing that expands into a 28 mm steel pipe to keep the wheel in place. See the Installation Steps tab for more information on how to install EW-4ESB casters.

Bolt M12 (12 mm) Length 2 1/4″ (57.15 mm)

Use the F-BUS component when this caster is used with the EP-96-ST pipe.

4 inches casters are made for:

  • More or less long trips (30 to 50 feet)
  • Frequent use (20 to 50 times a day)
  • Carts weighting less than 400 pounds
  • Narrow carts (between 16 and 24 in. wide)

EW-4ESB has a non-electric conductivity version: W-4ESB

 

For more frequent use or longer trips, we recommend considering the W-6PSB caster.

For carts that will go outside, roll on ramps or damaged floors, it’s preferable to use 6 inches casters.

All casters are equipped with a precision ball bearing.

Reviews

There are no reviews yet.

Be the first to review “4” ESD Swivel Stem Caster”
  1. Ensure you have the following parts:
    • 1x W-3ESB
    • 1x 28mm pipe of your choice
    • 1x Wrench
  2. Ensure that the structure is levelled when supported by the pipes that will be wheeled. Otherwise, the height difference might cause the structure to sway.
  3. Flip the structure for a better access to the bottom pipes.
  4. Engage the wheel brake to lock the wheel.
  5. Tighten the nut located on the top of the stem for the rubber bushing to expend until it barely fits inside the pipe.
  6. Insert the wheel rod completely inside the pipe. Help yourself with a mallet if needed.
  7. Rotate the wheel clockwise until it grips firmly inside the pipe.
Box Quantity32
Length4 in (102 mm)
Height5 1/8 in (130 mm)
Weight (kg/lbs)1.8 lb (0.8 kg)
Box DimensionsCardboard box of 18 X 11 X 12 in (460 X 280 X 300 mm)
Primary MaterialThermoplastic Rubber (TPR)
Temperature Resistance-22°F to 158°F (-30°C to 70°C)
Electric Conductivity (ESD)Yes (10^6– 10^8)
Loading Capacity250 lb (113 kg)
0
    0
    Your Cart
    Your cart is emptyReturn to Shop